Finding long reach brake calipers is difficult especially when you factor in that you might want them to be dual pivot, lightweight and good quality.....Here we have the answer!

• 53-73mm caliper arm reach - great for touring bikes and all sorts of other weird and wonderful cycles!
• Nut and bolt fitting (not allen/hex key)
• Alloy - silver with lazer etched Acor logo
• Brake pads included
• Does not work with frames that have recessed bolt hole
• Available for front and rear

The ideal brake lever for a fixed/single speed bike or classic bike with bar end/down tube shifters.

• Designed for use with caliper brakes on drop bars
• Black rubber hoods
• Lever is a nice polished alloy.
• Price is for a pair of levers - ie one for the front brake and one for the back!
  

Classic levers for classic bikes.

• The levers are made from alloy and come in two handlebar sizes (22.2mm or 23.8mm)
• The levers also include the alloy cable grommet where the cable exits the lever.
• The clamp is stainless steel - so no rusting!
• Compatible with road calipers and cantilevers (not suitable for V brakes/disks)

• A lightweight, alloy, sleek, simple and Practical set of brake levers from brake aces Tektro!
• Compatible with 22.2mm diamater bars - ie most flat type bars.
• Lever length (pivot to tip) approx. 105mm
• Works fine with road brake calipers and cantilever brakes (yes it pulls enough cable on either type).
• All alloy construction with polished silver lever and black anodised clamp body. Stainless steel bolts/nuts etc.
• Sold as a pair.

These levers will work with V brakes and Mechanical Disk Brakes too. They will not work properly with road brake calipers or cantelever brakes.

• Silver finish diecast aluminum bracket
• Silver anodized aluminum plate lever handle
• Anatomically designed rubber hood - gum
• BRS return spring
• W/Adjustable lead pipe for each lever
• 270g/pair

Classic, hard to get non-aero brake levers for drop handlebars. Just don your Milk Race jersey and take a trip back in time!

The Dia-Compe 204 is a non-aero lever with a built-in quick release.

These levers work with caliper or cantilever brakes, but not V-brakes. The price is per pair.

Classic, hard to get non-aero brake levers for drop handlebars. Just don your Milk Race jersey and take a trip back in time!

The Dia-Compe 202 is a non-aero lever with cable adjustment and anodised brake levers.

These levers work with caliper or cantilever brakes, but not V-brakes. The price is per pair.